Seamless monitoring of network traffic is critically important for enterprise network and security administrators: it lies at the very foundation of network threat detection and remediation. Regrettably, packet duplication has commonly been an undesirable side-effect of network traffic monitoring. Packet duplication produces redundant information in the monitoring traffic which can, besides overloading monitoring tools, result in packet drops, increased reporting of false positives, and seriously hamper the efficiency of SoC and NoC tools.
Packet recording has become a significant method to enable long-term traffic analysis and the stored information has been proven very valuable in case of security breach and calamity root cause analysis. Duplicate packets not only greatly increase the storage capacity, but the stored duplicate packets also often result in incorrect analysis results.
The common cause of duplicate packets in network monitoring traffic is through the use of the port mirroring feature of network switching devices, which is also known as a Switched Port Analyzer (SPAN). Using SPAN is a very common method of implementing network visibility. This feature, included in most enterprise-grade switches and routers, is a technique for copying packets traversing one or more switch ports sent to one or more network analysis tools.
The use of the SPAN port mirroring feature inevitably creates packet duplication. Specifically, port mirroring can be configured to only specify for packets into or out of a switch port. However, typically network administrators want a copy of both. The problem is when both the ingress and egress ports are mirrored; this results in duplicate packets being seen by network analysis tools. The timestamps may be different but the packet contents are the same. This challenge will be further compounded when SPAN is used for multiple connected devices.
In larger networks, tapping of traffic from multiple network segments, even the use of passive TAPs often results in packet duplication. Traffic traversing multiple network segments may be tapped by different TAPs and forwarded to the monitoring and inspection tools.
To avoid the adverse effects of packet duplication, the monitoring tools themselves may be forced to remove packet duplicates prior to implementing traffic analysis of the traffic. This scenario presents a number of challenges including bandwidth consumption on monitoring tools and consumption of precious processing resources on analysis tools impacting the CPU resources available for critical network analysis functions. The potential drop and processing resources available to the monitoring and analysis tool when it performs its own deduplication can be as high as 50%.
Packet deduplication refers to the capability for removing packet duplicates prior to network data being forwarded or transmitted to network analysis tools for the purpose of monitoring, analyzing, and recording. This typically causes a substantial reduction in the volume of traffic handled by such tools enabling an increase in their operational efficiency, a reduction in false-positive errors generated, and an elimination of security breaches that could exist in implementations without deduplication. Without duplicate packets being identified and removed first, analysis tools may generate erroneous alarms and/or produce compromised data and results.
In some cases, advanced network switches implement a basic level of software-based Layer 2 (L2) and Layer 3 (L3) deduplication as an optional feature on a per-port basis prior to forwarding traffic to an inline security tool. L2 deduplication removes identical Ethernet frames where the Ethernet header and the entire IP packet match, while L3 deduplication removes TCP or UDP packets where only the IP packet match. In such a case, the network switch checks for duplicates and removes only the immediately-previous packet if the duplicate arrives within a fixed type interval (typically in the order of a millisecond) of the original packet.
As enterprise network architectures continue to expand, network bandwidth levels continue to dramatically increase, newer tools for security, performance management, and monitoring keep getting deployed, a comprehensive network visibility layer is required.
That is exactly why in recent years Network Packet Brokers (NPBs) have come into play. Advanced network packet brokers allow a high level of deep packet inspection and processing including aggregation, filtering, and load balancing of traffic across the range of security and monitoring tools at data rates of up to 100 Gb/s.
With fine-grained, hardware-based deduplication typically built into advanced NPBs, the challenge of duplicate packets degrading the performance of security and monitoring tools is tackled in the best manner. With the advanced NPBs architecture, packets are sent to an internal packet processor for fine-grained, flexible flow-based deduplication and optimized for delivery to everything from IDS and IPS to forensics, network analyzers, data storage, and more.
Flow-based deduplication permits the elimination of duplicate packets using the range of attributes shared by IP packets in a flow including source IP, destination IP, protocol, and source and destination port. It may also enable the selection of inbound and outbound interfaces, CoS/QoS markings, TCP flags, and others.
Niagara Networks provides all the building blocks for an advanced Visibility Adaptation Layer at all data rates up to 100Gb, including taps, bypass elements, packet brokers, and a unified management layer support.
The Niagara Open Visibility enabled network packet brokers to provide a multi-purpose platform that covers all the visibility adaptation scenarios in a network including one network link to one tool (one-to-one), one network link to multiple tools (one-to-many), multiple network links to one tool (many-to-one) and multiple network links to multiple tools (many-to-many) – interlaced and loads balanced into a network-wide fabric.
Advanced Network Packet Brokers, include two segments, the modular N2 series that can be populated with a wide range of high-density, high-versatility, processor-accelerated modules. It supports a range of functional capabilities, including network tap, bypass, and packet broker, and deep packet processing applications.
The semi-fixed Open Visibility enabled 4540 and 4248-6C packet brokers combine fixed port density with modular Open Visibility support to allow Open Visibility from day one or as a feature upgrade.
In their role as packet processing and analysis engines, Niagara’s Open Visibility enabled NPB’s provide hardware-based, fine-grained support of deduplication of redundant (duplicate) packets before they reach analysis or security tools through the use of Packetron, an open system packet processor module. Packetron offloads packet processing from the NPB host, and bridges the gap between increased network traffic throughput and traffic processing needs for fine-grained, flow-based deduplication addressing the range of data duplication scenarios.
Niagara Networks are industry specialists in network visibility, providing advanced network solutions for the specific needs of individual enterprises and networks. Don’t leave your network vulnerable to security threats, schedule a consultation with one of our network visibility experts today to evaluate your network visibility challenges.